APEX 19***8221; PS-7 Wheel
The APEX PS-7 is the first of a new line of lightweight, street-focused wheels arriving in June in BMW-specific fitments. The development of this new line will allow us to continue developing track and race-specific designs separately, while also bringing our expertise and lightweight technology to the typically heavy and aesthetically focused street market. The PS-7 brings long needed improvements to a mesh design that***8217;s been seriously lacking in features, and left enthusiasts with only heavy alternatives.
Available Fitments
PS-7 Product Information:
Just like the rest of the APEX wheel line, the PS-7 is once again produced using the Flow-Forming manufacturing process. Flow-Forming, which has also been called ***8220;Roll Forging***8221; or ***8220;Spin Forging***8221;, produces a barrel with similar strength to that of a fully forged wheel. This significantly reduces weight in the most significant part of the wheel, as it has the greatest impact on rotational mass. Even with key strength improvements that add weight in select areas, static weights are reduced by 20% on average versus cast alternatives.
More aggressive wheel widths and offsets were selected versus our line of race-oriented wheels, allowing for a flush fit without spacers. Initially available in 18***8221; and 19***8221; diameters, the PS-7 is produced using three unique face profiles with increasing spoke concavity. We designed these these face profiles to significantly increased concavity on many applications that are traditionally more conservative. A total of 17 BMW specific sizes in three finishes are initially being released.
Strength improvements were made to help specifically address the unique abuses of the street where low-profile and stretched tire fitments are used. To help fight wheel bends, we***8217;ve increased the thickness of the wheel***8217;s inner lip. Load ratings exceed JWL requirements, and all sizes have been crush tested in Japan, earning them official VIA certification and registry marks. Additionally, the barrel***8217;s diameter increases sharply after the drop center, improving big brake kit clearance.
Performance luxury vehicles deserve much more than heavy cast wheels. The PS-7 combines racing inspired lightweight engineering with desirable street styling, to produce the ideal wheel of choice.
Available Finishes
Warranty Summary:
2 year Structural, 1 year limited finish warranty guarantees wheels will be free from defects in materials, workmanship and paint finish under normal and reasonable use.
Misc.
Ordering and Contact
The APEX PS-7 is the first of a new line of lightweight, street-focused wheels arriving in June in BMW-specific fitments. The development of this new line will allow us to continue developing track and race-specific designs separately, while also bringing our expertise and lightweight technology to the typically heavy and aesthetically focused street market. The PS-7 brings long needed improvements to a mesh design that***8217;s been seriously lacking in features, and left enthusiasts with only heavy alternatives.
Available Fitments
19x8.5" ET35 - 21.90lbs - Profile 1 - $329
19x8.5" ET20 - 22.40lbs - Profile 2 - $329
19x9.0" ET35 - 22.60lbs - Profile 2 - $349
19x9.5" ET33 - 23.00lbs - Profile 2 - $359
19x9.5" ET22 - 23.20lbs - Profile 3 - $359
19x10.0" ET25 - 23.60lbs - Profile 3 - $369
19x10.5" ET22 - 24.60lbs - Profile 3 - $399
19x11.0" ET25 - 24.70lbs - Profile 3 - $419
PS-7 Product Information:
Just like the rest of the APEX wheel line, the PS-7 is once again produced using the Flow-Forming manufacturing process. Flow-Forming, which has also been called ***8220;Roll Forging***8221; or ***8220;Spin Forging***8221;, produces a barrel with similar strength to that of a fully forged wheel. This significantly reduces weight in the most significant part of the wheel, as it has the greatest impact on rotational mass. Even with key strength improvements that add weight in select areas, static weights are reduced by 20% on average versus cast alternatives.
More aggressive wheel widths and offsets were selected versus our line of race-oriented wheels, allowing for a flush fit without spacers. Initially available in 18***8221; and 19***8221; diameters, the PS-7 is produced using three unique face profiles with increasing spoke concavity. We designed these these face profiles to significantly increased concavity on many applications that are traditionally more conservative. A total of 17 BMW specific sizes in three finishes are initially being released.
Strength improvements were made to help specifically address the unique abuses of the street where low-profile and stretched tire fitments are used. To help fight wheel bends, we***8217;ve increased the thickness of the wheel***8217;s inner lip. Load ratings exceed JWL requirements, and all sizes have been crush tested in Japan, earning them official VIA certification and registry marks. Additionally, the barrel***8217;s diameter increases sharply after the drop center, improving big brake kit clearance.
Performance luxury vehicles deserve much more than heavy cast wheels. The PS-7 combines racing inspired lightweight engineering with desirable street styling, to produce the ideal wheel of choice.
Available Finishes
- Hyper Silver
- Anthracite
- Satin Black
Warranty Summary:
2 year Structural, 1 year limited finish warranty guarantees wheels will be free from defects in materials, workmanship and paint finish under normal and reasonable use.
Misc.
- Comes with redesigned gloss-black APEX center caps
- Accepts OEM Roundel center caps
- Does not come with valve stems
- Installs using your factory lugs or a stud conversion
- BMW hub-centric - no centering rings
- Accepts all wheel spacers including 5mm while still remaining hub-centric
- TPMS compatible
Ordering and Contact
- Phone: Call (888) 499-9135 EXT. #1 for phone orders.
- Payment: Credit and Debit Cards: Visa, Mastercard, AMEX, Discover, PayPal. Bank Wire Transfers are also available. Contact us to use a wire transfer for payment on your order.
- Tax: California customers will be charged 9.00% CA sales tax.
- Shipping: APEX ships all orders with UPS.
- APEX Hours:
Monday thru Friday: 9AM to 5PM PST
Saturday and Sunday: Closed - Warehouse and local pickup: The APEX warehouse is at 7888 Marathon Drive, Unit A, Livermore, CA, 94550 (Map It) , (888) 499-9135. This is where you pick up local orders.
Aucun commentaire:
Enregistrer un commentaire