Hey guys, I've got an '03 330i, a couple years back I bought some braided lines and stuck them in the garage until the car needed brakes. I went out there today to install them with new pads and rotors and they aren't right! The caliper end is a lolipop style banjo fitting rather than the threaded end that threads into the caliper like stock.
This is very much my ignorance as I have never done BMW brakes before and thought that the banjo fitting was correct, I didn't realize how the stock lines are and of course, I didn't look at it to make sure the lines were right. Since I bought them around 2 years ago I am stuck with them.
So, does anyone happen to know what size banjo bolt will fit the front and rear calipers? I'm thinking I'll just do it like a BBK and run a banjo bolt with 2 crush washers that way I didn't waste my money on these lines but I have absolutely no clue what size bolts I'll need.
Thanks for any help.
This is very much my ignorance as I have never done BMW brakes before and thought that the banjo fitting was correct, I didn't realize how the stock lines are and of course, I didn't look at it to make sure the lines were right. Since I bought them around 2 years ago I am stuck with them.
So, does anyone happen to know what size banjo bolt will fit the front and rear calipers? I'm thinking I'll just do it like a BBK and run a banjo bolt with 2 crush washers that way I didn't waste my money on these lines but I have absolutely no clue what size bolts I'll need.
Thanks for any help.
Need banjo bolt size for brake calipers
Aucun commentaire:
Enregistrer un commentaire