Hey guys so i'm having a little trouble finding this problem and would like some input
When i'm driving and let off the gas the throttle hangs for a bit, the car is still on the throttle at the same % i last had it at for about 1-2 seconds. Its a little bit sketchy feeling
The car is a 2002 325xi. The engine was just replaced with a 330i engine and alot of maintenance was done in the process. I didn't have this problem with the old engine at all. I had the correct software for the DME installed already.
I am getting p1071 and p1074 ( if i recalled the numbers correctly ) for banks 1 and 2 too lean. I have not diagnosed the problem for that yet and i'm wondering if they are related at all.
Parts replaced recently
Both intake rubber boots to the throttle body
Disa valve and gasket
CCV hose to the dip stick
A few vacuum lines around the engine that were brittle
When i'm driving and let off the gas the throttle hangs for a bit, the car is still on the throttle at the same % i last had it at for about 1-2 seconds. Its a little bit sketchy feeling
The car is a 2002 325xi. The engine was just replaced with a 330i engine and alot of maintenance was done in the process. I didn't have this problem with the old engine at all. I had the correct software for the DME installed already.
I am getting p1071 and p1074 ( if i recalled the numbers correctly ) for banks 1 and 2 too lean. I have not diagnosed the problem for that yet and i'm wondering if they are related at all.
Parts replaced recently
Both intake rubber boots to the throttle body
Disa valve and gasket
CCV hose to the dip stick
A few vacuum lines around the engine that were brittle
Aucun commentaire:
Enregistrer un commentaire