So I bought this 2000 323i and the sunroof dipped lower on the passenger rear corner. It doesn't leak. So I undid the 6 torx screws and took the glass off to attempt to bring it to a flush position. It seems the slider on that side will keep getting stuck and I cannot force it to move forward or back (neither can the motor). My question is what can prevent that slider from moving assuming all visible debris is removed. Since I have messed with it, it is also no longer in sync with the slider on the other side so the screws no longer line up.:banghead: It will not move forward enough to the point of rising on the track, so I have one side forward and up and one side back and down. Any ideas?
Aucun commentaire:
Enregistrer un commentaire