Hey guys just putting a feeler thread out to see if there's any interest in picking up an m54 zhp engine (used of course) and a set of forged 8.5:1 weisco pistons (new in box but without rings). I'm up in the air as to which direction to go with my project and thought I'd see what kind of interest there is.
I bought the engine and put it on a stand, and since then haven't had time to go for the turbo build I had planned, might be going in a different direction now.. I'll have pics up next week as soon I'm back home from work.
Details:
- Engine was already out of the zhp when I bought it therefore I don't have compression test #s.
- Oil was good when drained, no milky color.
- comes with everything, all accessories (oil filter housing, a/c, power steering pump and exhaust manifolds) + plus coils.
- haven't taken it apart aside from valve cover so I can't confirm the condition of the water pump, or the thermostat (but both are included as well)
- don't have the intake for it (never came with the engine)
- from an auto car (no flywheel)
My plan was to bore it and throw in the forged pistons, so I didn't care if I couldn't get the compression numbers. My loss is your gain on this one. The zhp cams alone are worth quite a bit, and this is the full motor with all the little goodies (minus the intake).
Again pics to follow, and any detailed questions I can answer once I'm home to take it apart etc. I can throw it on a pallet and ship if anyone in BC is interested, and for Alberta I can throw it in my truck and deliver as long as its within reason ie: not Fort Mac. Calgary/Red Deer/Edmonton/Lethbridge areas aren't a problem.
- $1500 obo for the complete engine (based on prices of cams, rotating assemblies bare blocks and accessories).
- $400 for the forged pistons.
PM with offers.
I bought the engine and put it on a stand, and since then haven't had time to go for the turbo build I had planned, might be going in a different direction now.. I'll have pics up next week as soon I'm back home from work.
Details:
- Engine was already out of the zhp when I bought it therefore I don't have compression test #s.
- Oil was good when drained, no milky color.
- comes with everything, all accessories (oil filter housing, a/c, power steering pump and exhaust manifolds) + plus coils.
- haven't taken it apart aside from valve cover so I can't confirm the condition of the water pump, or the thermostat (but both are included as well)
- don't have the intake for it (never came with the engine)
- from an auto car (no flywheel)
My plan was to bore it and throw in the forged pistons, so I didn't care if I couldn't get the compression numbers. My loss is your gain on this one. The zhp cams alone are worth quite a bit, and this is the full motor with all the little goodies (minus the intake).
Again pics to follow, and any detailed questions I can answer once I'm home to take it apart etc. I can throw it on a pallet and ship if anyone in BC is interested, and for Alberta I can throw it in my truck and deliver as long as its within reason ie: not Fort Mac. Calgary/Red Deer/Edmonton/Lethbridge areas aren't a problem.
- $1500 obo for the complete engine (based on prices of cams, rotating assemblies bare blocks and accessories).
- $400 for the forged pistons.
PM with offers.
Aucun commentaire:
Enregistrer un commentaire